The Journal of the Acoustical Society of KoreaISSN:1225-4428(Print) 2287-3775(Online)한국음향학회

C. Lee, B. Kang, B.-H. Choi, J. Lee, and K. Lee, “Observation and characterization of squeak noises of polymeric materials for automotive interior parts under field-degradation,” Trans. KSAE, 25, 257-265 (2017).

J. A. O. Bruno, N. L. Allan, T. H. K. Barron, and A. D. Turner, “Thermal expansion of polymers: Mechanisms in orthorhombic polyethylene,” Phys. Rev. B, 58, 8416-8427 (1998)

H. Rodrigues and P. Fernandes, “A material based model for topology optimization of thermoelastic structures,” Int. J. Numer. Methods Eng. 38, 1951-1965 (1995).

Q. Li, G. P. Steven, and Y. M. Xie, “Thermoelastic topology optimization for problems with varying temperature fields,” J. Therm. Stresses, 24, 347-366 (2001).

Q. Xia and M. Y. Wang, “Topology optimization of thermoelastic structures using level set method,” Comput. Mech. 42, 837-857 (2008).

T. Gao and W. Zhang, “Topology optimization involving thermo-elastic stress loads,” Struct. Multidisc. Optim. 42, 725-738 (2010).

H. Chung, O. Amirb, and H. A. Kima, “Level-set topology optimization considering nonlinear thermoelasticity,” Comput. Meth. Appl. Mach. Eng. 361, 1-50 (2020).

J. Zheng, X. Rong, and C. Jiang, “Thermoelastic topology optimization for structures with temperature-dependent material properties,” Sci. China Technolo. Sci. 66, 3488-3503 (2023).

Y. Chen, L. Ye, Y. X. Zhang, and C. Yang, “A multi material topology optimization with temperature dependent thermoelastic properties,” Eng. Optim. 54, 2140-2155 (2022).

Z.-D. Ma, N. Kikuchi, and I. Hagiwara, “Structural topology and shape optimization for a frequency response problem,” Comput. Mech. 13, 157-174 (1993).

S. Min, N. Kikichi, Y. C. Park, S. Kim, and S. Chang, “Optimal topology design of structures under dynamic loads,” Struct. Multidisc. Optim. 17, 208-218 (1999).

N. Olhoff and J. Du, “Generalized incremental frequency method for topological design of continuum structures for minimum dynamic compliance subject to forced vibration at a prescribed low or high value of the excitation frequency,” Struct. Multidisc. Optim. 54, 1113-1141 (2016).

L. Shu, M. Y. Wang, Z. Fang, Z. Ma, and P. Wei, “Level set based structural topology optimization for minimizing frequency response,” J. Sound. Vib. 330, 5820-5834 (2011).

O. M. Silva, M. M. Neves, and A. Lenzi, “A critical analysis of using the dynamic compliance as objective function in topology optimization of one-material structures considering steady-state forced vibration problems,” J. Sound Vib. 444, 1-20 (2019).

I. M. Ward and J. Sweeney, Mechanical Properties of Solid Polymers, 3^rd Ed (A John Wiley and Sons, Ltd. Chichester, 2013), pp. 135-166.

M. Nasraoui, P. Forquin, L. Siad, and A. Rusinek, “Influence of strain rate, temperature and adiabatic heating on the mechanical behavior of poly-methyl-methacrylate: Experimental and modelling analyses,” Mater. Des. 37, 500-509 (2012).

I. H. Sahputra, A. Alexiadis, and M. J. Adams, “Temperature dependence of the Young’s modulus of polymers calculated using a hybrid molecular mechanics–molecular dynamics method,” J. Phys. Condens. Matter. 30, 1-19 (2018).

G. Allaire, Numerical Analysis and Optimization (Oxford University Press, New York, 2009), pp. 1-28.

C. Kim, M. Jung, T. Yamada, S. Nishiwaki, and J. Yoo, “FreeFEM++ code for reaction-diffusion equation-based topology optimization: for high-resolution boundary representation using adaptive mesh refinement,” Struct. Multidisc. Optim. 62, 439-455 (2020).

T. Yamada, K. Izui, S. Nishiwaki, and A. Takezawa “A topology optimization method based on the level set method incorporating a fictitious energy,” Comput. Meth. Appl. Mech. Eng. 199, 2876-2891 (2010).

H. Li, T. Yamada, P. Jolivet, K. Furuta, T. Kondoh, K. Izui, and S. Nishiwaki, “Full-scale 3D structural topology optimization using adaptive mesh refinement based on the level-set method,” Finite Elem. Anal. Des. 194, 276-308 (2021).