The Journal of the Acoustical Society of KoreaISSN:1225-4428(Print) 2287-3775(Online)한국음향학회

Although it is ideal that the sound with the range of 20~20,000 Hz is produced by the loudspeaker system composing of only one loudspeaker unit, it is almost impossible now. Therefore, the audible frequency range is now produced by the loudspeaker system, which is consisted of more than two loudspeaker units. The multi-way loudspeaker system certainly requires a crossover filter, which is divided the audible frequency into low and high frequency ranges. The crossover frequency of filter usually is in the range of 1~4 kHz, the frequency range can largely affect to the sound articulation and quality. It is an example that the phase and amplitude at the crossover frequency can be different from each other, due to the variously reasons. Conversely, they can not produce the smooth frequency response due to the different distance between the two loudspeaker units and electrical properties. As a result, the sound articulation and quality can be degraded. Therefore, the phase and amplitude response at the crossover frequency has to be deeply considered, in order to exactly match the woofer and tweeter. In this study, it is proposed the methods which are the flat frequency and phase response to be obtained by adjusting of the delay time between loudspeaker units, and the choice of filter to be considered the roll-off properties of each unit. It is achieved the frequency response with ±1 dB, and the sound articulation is also improved.