Experimental study to investigate the structural integrity of welded vehicle structure for BSR (Buzz,  Squeak,  Rattle) noise by vibration measurement

Yunsang Kwak Xkwak; Jongho Lee; Junhong Park

doi:10.7776/ASK.2019.38.3.334

All Issue

2019 Vol.38, Issue 3 Preview Page Next Page

Research Article

Experimental study to investigate the structural integrity of welded vehicle structure for BSR (Buzz, Squeak, Rattle) noise by vibration measurement 진동 특성을 이용한 접합된 차량 구조의 BSR(Buzz, Squeak, Rattle) 소음 강건성 관측에 대한 실험연구

31 May 2019. pp. 334-339

PDF XML

Abstract

In this study, the vibration test method to nondestructively evaluate the possibility of vehicle BSR (Buzz, Squeak, Rattle) noise generation in spot-welded structures was proposed. The weld quality was predicted by analyzing the local vibration transmission characteristics for the beam-shaped structure attached to testing spots. The bending stiffness was evaluated from the identified vibration properties. From the change in the stiffness, the weld quality was evaluated. For verification of the proposed method, the welded specimens were fabricated with partial changes in welding parameters. The local vibration transfers were measured. The frequency bands affected by the weld quality was identified. The capability of evaluating the welding parameters including defect position and quality variations was investigated. The proposed method enables fast quality evaluation to minimize the possibility of BSR noise generation in the manufactured vehicle.

Keywords

BSR (Buzz, Squeak, Rattle) noise

Spot welding

Vibration transfer

Local vibration

차량 점용접 부위에서 BSR(Buzz, Squeak, Rattle) 소음 발생 가능성을 국부 진동을 사용하여 비파괴적으로 추정하는 진동기반 계측법을 제시한다. 용접부에 부착된 구조물에 의한 점용점 부위의 국부적인 진동을 유발하고 진동전달 특성을 파악한다. 관측된 진동 특성으로부터 국부 구조의 굽힘강성값을 도출하였다. 강성값의 변화로부터 점용접의 상태 강건성을 파악하였다. 제시되는 방법의 검증을 위해 부분적으로 용접품질이 변화된 시편을 제작하였다. 제작된 시편에서 계측된 진동 특성을 분석하였다. 용접 강건성에 의해 변화하는 특정 주파수 대역을 파악하였다. 구조별, 위치별 계측을 통해 제시된 방법으로 분별이 가능한지 검증하였다. 국부 진동 평가방법은 구조물의 용접 강건성을 생산 현장에서 파악하게 하는 평가방법으로써 BSR발생 가능성을 저감하기위한 생산 품질 확보에 사용될 수 있다.

키워드

BSR (Buzz, Squeak, Rattle) 소음

스팟용접

진동전파

국부진동

References

M. Trapp and F. Chen, Automotive Buzz, Squeak and Rattle: Mechanisms, Analysis, Evaluation and Prevention (Elsevier, Waltham, 2011), pp. 2-131.

R. A. Rorrer and V. Juneja, "Friction-induced vibration and noise generation of instrument panel material pairs," Tribol. Int., 35, 523-531 (2002).

10.1016/S0301-679X(02)00047-6

F. Kavarana and B. Rediers, "Squeak and rattle-state of the art and beyond," SAE Tech. Paper., 1999.

10.4271/1999-01-1728

U. K. Chandrika and J. H. Kim, "Development of an algorithm for automatic detection and rating of squeak and rattle events," J. Sound Vib., 329, 4567-4577 (2010).

10.1016/j.jsv.2010.05.003

S. Choi, S. Ahn, and K. D. Ih, "Basic principle of BSR (Buzz, Squeak, Rattle) noise according to the generation mechanism" (in Korean), J. Acoust. Soc. Kr. 37, 309-316 (2018).

S. S. Gosavi, "Automotive buzz, squeak and rattle (BSR) detection and prevention," SAE Tech. Paper., 2005.

10.4271/2005-26-056

S. -H. Shin, C. -U. Cheong, D. -W. Kim, and S. -S. Jung, "Evaluation of BSR noise properties of instrument panel in a vehicle" (in Korean), Trans. Korean Soc. Noise Vib. Eng. 20, 644-650 (2010).

10.5050/KSNVE.2010.20.7.644

S. Aslanlar, A. Ogur, U. Ozsarac, E. Ilhan, and Z. Demir, "Effect of welding current on mechanical properties of galvanized chromided steel sheets in electrical resistance spot welding," Materials & Design, 28, 2-7 (2007).

10.1016/j.matdes.2005.06.022

Information

Publisher :The Acoustical Society of Korea
Publisher(Ko) :한국음향학회
Journal Title :The Journal of the Acoustical Society of Korea
Journal Title(Ko) :한국음향학회지
Volume : 38
No :3
Pages :334-339
Received Date : 2019-03-04
Revised Date : 2019-04-18
Accepted Date : 2019-05-14
DOI :https://doi.org/10.7776/ASK.2019.38.3.334

The Journal of the Acoustical Society of Korea ISSN:1225-4428(Print) 2287-3775(Online) 한국음향학회지

All Issue