A study on configuration of acoustic package for towed array sonar using design of experiments

JungHyun Lee; Jeungho Shin; Oh-Cho Kwon; Gunchil Kim

doi:10.7776/ASK.2019.38.2.200

All Issue

2019 Vol.38, Issue 2 Preview Page Next Page

Research Article

A study on configuration of acoustic package for towed array sonar using design of experiments 실험계획법을 이용한 예인 음탐기용 음향패키지 형상 연구

31 March 2019. pp. 200-206

PDF XML

Abstract

In this paper, the characteristics of receiving voltage sensitivity about acoustic package in towed array sonar is analyzed through the numerical simulation and design of experiments. Simulation results show that the variation of receiving voltage sensitivity is caused by the structural resonance mode shape on baseline acoustic package. The effect of design parameters of the acoustic package are analyzed through the design of experiments to reduce the deviation of receiving voltage sensitivity. A change of hydrophone shield can thickness (t) is the greatest effect on the deviation of receiving voltage sensitivity. As a result of water tank test, the acoustic package derived from the design of experiments has reduced deviation of receiving voltage sensitivity.

Keywords

Acoustic package

Towed array sonar

Numerical simulation

Design of experiments

Receiving voltage sensitivity

본 연구에서는 예인 음탐기용 음향패키지에 대한 수신전압감도 특성을 분석하기 위해 수치해석과 실험계획법을 적용하였다. 수치해석 결과는 초기 설계된 음향패키지의 구조 공진 모드 특성으로 인한 수신전압감도 변화를 보여준다. 수신전압감도 편차를 줄이기 위해 도출된 음향패키지 설계 변수의 영향은 실험계획법을 통해 분석하였다. 수신전압감도 편차는 수중청음기 쉴드캔 두께(t)의 변화에 가장 민감한 것을 확인하였다. 수조시험 결과 실험계획법에 의해 도출된 음향패키지는 수신전압감도 편차가 감소됨을 확인하였다.

키워드

음향패키지

예인 음탐기

수치해석

실험계획법

수신전압감도

References

R. J. Urick, Principles of Underwater Sound, 3^rd Ed. (McGraw-Hill, Washington D. C, 1983), pp. 31-46.

H. S. Seo, Y. H. Cho, and C. Y. Joh, "Structural-acoustic coupled analysis of buried hydrophone system" (in Korean), Trans. Korean Soc. Noise Vib. Eng. 17, 797-804 (2007).

10.5050/KSNVN.2007.17.9.797

S. Chen, W. Zhu, and Y. Cheng, "Multi-Objective optimization of acoustic performances of polyurethane foam composites," Polymers. 10, 788 (2018).

10.3390/polym10070788

H. Kang, J. S. Jang, D. H. Kim, J. H. Kang, W. S. Yoo, and J. W. Lee, "Prediction of impact energy absorption in a high weight drop tester by response surface methodology" (in Korean), J. Korean Soc. Manuf. Process Engineers. 15, 44-51 (2016).

10.14775/ksmpe.2016.15.3.044

D. Shin, C. Cheong, S. Heo, T. H. Kim, and J. Jung. "Performance/Noise optimization of centrifugal fan using response surface method" (in Korean), Trans. Korean Soc. Mech. Eng. 41, 165-172 (2017).

S. N. Rim, S. R. Shin, and H. S. Shin, "A study on a-pillar & wiper wind noise estimation using response surface methodology at design stage" (in Korean), J. Acoust. Soc. Kr. 37, 292-299 (2018).

Information

Publisher :The Acoustical Society of Korea
Publisher(Ko) :한국음향학회
Journal Title :The Journal of the Acoustical Society of Korea
Journal Title(Ko) :한국음향학회지
Volume : 38
No :2
Pages :200-206
Received Date : 2018-11-10
Revised Date : 2019-01-24
Accepted Date : 2019-03-26
DOI :https://doi.org/10.7776/ASK.2019.38.2.200

The Journal of the Acoustical Society of Korea ISSN:1225-4428(Print) 2287-3775(Online) 한국음향학회지

All Issue